New AMSOIL Synthetic Manual Transmission and
Transaxle Gear Lube (MTG) meets and exceeds the gear, bearing,
synchromesh and seal demands found in automobiles and light
trucks.
AMSOIL Synthetic Manual Transmission and Transaxle
Gear Lube (MTG) is designed to meet the special requirements
of certain manual transmissions and transaxles, such as the
New Venture NV4500. It is designed to replace AMSOIL 80W-90
Synthetic Gear Lube (AGT) and provide improved internal component
protection. These transmissions are cast iron and have exhaust
pipes close to them, causing them to run hot. Increased operating
temperatures can harden seals and cause oil leaks. In addition
to lubricating gears, bearings and synchromesh systems, transmission
oil must keep seals soft even when temperatures increase. The
premium synthetic formulation of AMSOIL Synthetic Manual Transmission
and Transaxle Gear Lube is designed to specifically address
the needs of these hot running transmissions.
MTG is formulated with extreme pressure (EP)
additives and advanced synchromesh qualities that provide smooth
shifts while protecting gears, bearings and seals. It is not
corrosive to yellow metals, such as copper, that are used in
some synchromesh systems. MTG provides the maximum transmission
and transaxle internal component protection.
Applications
MTG is recommended for synchronized manual
transmissions and transaxles that require 75W-85, 75W-90 or
80W-90 API GL-4 gear lube. Recommended for use in NV 4500 transmissions
and replaces GM part # 12346190 and Chrysler part # 4874459
(Chrysler specification MS-9070). MTG meets GL-4 performance
specifications required by some models of Acura, Hyundai, Infiniti,
Kia, Land Rover, Lexus, Mazda, Mitsubishi-Fuso and Zetor. Ideal
for muscle car transmissions, including Muncie, Borg Warner,
Saginaw, Ford Toploader, Dearborn and New Process.
|
TYPICAL TECHNICAL PROPERTIES
|
|
Synthetic Manual Transmission
and
Transaxle Gear Lube 75W-90 API GL-4 (MTG)
|
| Kinematic Viscosity @ 100°C,
cSt (ASTM D-445) |
13.8
|
| Kinematic Viscosity @ 40°C,
cst (ASTM D-445) |
83.7
|
| Viscosity Index (ASTM D-2270) |
170
|
| Flash Point, °C (°F) (ASTM
D-92) 150°C Min. |
226 (439)
|
| Pour Point, °C (°F) (ASTM
D-97) |
-48 (-54)
|
| 4-Ball Wear 75°C, 1200 rpm,
40kg, 1 hr. |
0.38mm
|
| Brookfield Viscosity @ -40°C |
42,846
|
| Foam Stability (ASTM D-892)
(20/50/20) |
0/0/0
|
| Copper Corrosion (3 hr, 121°C)
(ASTM D-130) |
1B
|
