AMSOIL Synthetic Gear Lubes

AMSOIL Synthetic Gear Lubes deliver maximum power and fully protect hard-working drivetrains. Synthetics, of course, deliver maximum power because their molecular structure best reduces friction, a big power-eater. And they protect best, even in temperatures that gel or fry conventional lubes.

In fact, AMSOIL Gear Lubes provide easy, dependable cold-temperature shiftability in a fraction of the time required by conventional fluids. They actually knock high lube temperatures down to optimal - and outlast ordinary lubes. Excellent for use in passenger cars and trucks requiring an EP gear lube, including those with limited slip differentials.

SEVERE GEAR™ Synthetic Extreme Pressure Gear Lubes
AMSOIL Severe Gear Synthetic Extreme Pressure (EP) Lubricants are premium grade lubricants specifically engineered for maximum performance in severe duty applications. These state-of-the-art AMSOIL formulations feature an exclusive blend of high viscosity, shear stable synthetic base oils and an extra treatment of high-performance additives. AMSOIL Severe Gear Synthetic EP Lubricants maintain their viscosity for long-lasting protection against metal-to-metal contact. The proprietary AMSOIL additives form an iron-sulfide barrier coating on gear surfaces, providing the ultimate line of defense against wear, pitting and scoring. AMSOIL Severe Gear lubricants prevent "thermal runaway" - a phenomenon caused by a lubricant's inability to control friction and increased heat under high-stress conditions. By preventing thermal runaway, AMSOIL Severe Gear Synthetic EP Lubricants inhibit rapid lubricant degradation and component damage. Equipment runs better and lasts longer with AMSOIL Severe Gear Synthetic EP Lubricants.

Use in differentials, manual transmissions or other gear applications where one or more of the following standards are specified: API GL-5 & MT-1, MIL-PRF-2105E, Dana SHAES 234 (Formerly Eaton PS-037) for 250,000 miles, Mack GO-J, Arvin/Meritor 0-76N (75W-90) & 0-76M (75W-140), plus hypoid gear oil specifications from all foreign and domestic manufacturers such as GM, Ford and Daimler Chrysler. Can also be used in rear axles where API Service GL-4 lubricant is recommended.

AMSOIL Long Life Synthetic Gear Lubes
AMSOIL Long Life Synthetic Gear Lubes are extended drain gear lubes engineered specifically to last several times longer and protect gears better than all conventional gear oils. These exclusive AMSOIL formulations of premium synthetic base oils and high performance additives resist acid, carbon and varnish formation from oxidative breakdown. Components run cleaner and last longer. AMSOIL Long Life Synthetic Gear Lubes are shear stable and friction reducing. They maintain their viscosity during extended service for maximum wear control and they are fuel-efficient. The superior cold temperature fluidity and high temperature stability properties of AMSOIL Long Life Synthetic Gear Lubes make them excellent for all-season use. Equipment lasts longer and maintenance costs are reduced with AMSOIL Long Life Synthetic Gear Lubes.

75W-90 Synthetic Manual Transmission and Transaxle Gear Lube
AMSOIL 75W-90 Synthetic Manual Transmission and Transaxle Gear Lube (MTG) is designed to meet the special requirements of certain manual transmissions and transaxles, such as the New Venture NV4500. It is designed to replace AMSOIL 80W-90 Synthetic Gear Lube (AGT) and provide improved internal component protection. These transmissions are cast iron and have exhaust pipes close to them, causing them to run hot. Increased operating temperatures can harden seals and cause oil leaks. In addition to lubricating gears, bearings and synchromesh systems, transmission oil must keep seals soft even when temperatures increase. The premium synthetic formulation of AMSOIL Synthetic Manual Transmission and Transaxle Gear Lube is designed to specifically address the needs of these hot running transmissions.

75W/80W-90 Universal Synthetic Marine Gear Lube
AMSOIL Universal Synthetic Marine Gear Lube is an exclusive AMSOIL formulation of synthetic base oils and high performance additives that address the specific concerns of marine applications. It is extreme pressure (EP) additive fortified for superior protection of fast accelerating, high torque/horsepower engines. It protects against shock loading from cavitation of heavily loaded engines.

AMSOIL Universal Synthetic Marine Gear Lube is water resistant. It maintains extreme pressure protection even when contaminated with as much as 10% water. It promotes longer seal life, preventing excessive water leakage. AMSOIL Universal Synthetic Marine Gear Lube protects against rust and is compatible with aluminum, copper and brass alloys.