 
GM H2 Hummer 6.0L Vortec™ and Ford 6.0L Diesel
PowerStroke™ Applications
PRODUCT DESCRIPTION
Truck sales represent the fastest growing segment
of the U.S. automotive market. Over 50 percent of new vehicles
sold today are trucks, and AMSOIL Dealers are capitalizing on
this expanding market. And now, AMSOIL has expanded that market
even further with the addition of premium filters for Ford 6.0L
Diesel PowerStroke™ engine and the GM H2 Hummer 6.0L Vortec™.
AMSOIL PCF-60 PowerCore® Air Filter
for Ford 6.0L Diesel PowerStroke™ Applications
&
AMSOIL PCF-H2 PowerCore® Air Filter for GM H2 Hummer 6.0L
Vortec™ Applications
AMSOIL now offers premium PowerCore® Air Filters
for Ford 6.0L Diesel PowerStroke™ and GM H2 Hummer 6.0L Vortec™
applications. The rugged structure of PowerCore® filters features
an innovative, layered, fluted filter media which allows air to
enter an open flute while forcing it out an adjacent flute, allowing
only clean air into the engine. Dirty air is effectively filtered
and cleaned in only one pass through the media.
- Ten times more efficient than standard filter
designs
- Increases contaminant holding capacity
- Eliminate media movement, expansion, contracting
and bunching
- Contaminants remain trapped and won't dislodge
during servicing
- Lighter, smaller design simplifies filter
servicing.
PowerCore® is a registered trademark of the
Donaldson Company Inc. These filters are manufactured by Donaldson
for AMSOIL®.
AMSOIL FFK-60 Fuel Filter for Ford 6.0L Diesel
PowerStroke™ Applications
The AMSOIL FFK-60 Fuel Filter incorporates both
a primary and secondary filter for maximum fuel cleanliness. The
primary 10 micron filter, located in the Horizontal Fuel Conditioning
Module (HFCM), performs initial fuel cleansing before sending
the clean pressurized fuel to secondary four micron filter, mounted
to the oil filter housing.
The secondary fuel filter includes a fuel pressure
regulator and an orifice on top of the housing that bleeds air
out of the housing and back to the fuel tank. Following its trip
through the secondary filter, fuel is returned to the HFCM, where
it is either directed to the tank or returned to the primary filter.
AMSOIL SDF-88 Oil Filter for Ford 6.0L Diesel
PowerStroke™ Applications
Constructed of a highly efficient synthetic blend
media, the AMSOIL SDF-88 Oil Filter provides increased engine
life and improved filtration efficiency.
The AMOSIL SDF-88 is a cartridge-style filter
located on the top of the engine. When the filter is removed during
servicing, the oil filter housing drain valve automatically opens,
draining the oil from the housing to the pan.
The oil filter base of the SDF-88 directs oil
to the oil filter, engine oil pressure switch (EOP), engine oil
temperature sensor (EOT) and turbocharger oil feed. The filter
base also includes an anti-drain back check valve, keeping oil
in the filter assembly when the engine is shut off.
|
