Ultimate protection for hard-driven, high-performance
vehicles. Dramatically reduces friction and wear for improved
performance. Excels at both high and low temperature performance.
Outperforms other conventional and synthetic greases.
Applications
AMSOIL Series 2000 Synthetic Lithium Complex
Racing Grease meets the highest performance standards of the National
Lubricating Grease Institute, GC for wheel bearing applications
and LB for chassis applications.
Load Capacity
AMSOIL Series 2000 Racing Grease is an extreme-pressure
multi-purpose grease formulated for high-temperature/high-speed
applications. Yet, it excels in the protection of low-speed bearings,
a job usually reserved for heavy-duty products. Components get
the load bearing capacity of a heavy-duty grease without sacrificing
the high-temperature protection of a multi-purpose.
Anti-Wear Performance
AMSOIL Series 2000 Racing Grease passes the Ford
Film Strength Endurance Test with a 16 point margin (see graph).
Most nonsolid-fortified racing greases, synthetic or conventional,
do not pass. AMSOIL Series 2000 Racing Grease keeps greased components
in like-new condition.
 All-Temperature
Protection
AMSOIL Series 2000 Racing Grease pairs a high
Viscosity Index synthetic base oil with a top-quality lithium
complex thickener, known for its extraordinary performance in
temperature extremes. AMSOIL Series 2000 Racing Grease offers
excellent low-temperature pumpability and high-temperature consistency
for dependable all-temperature protection.
Oxidation Resistance and Inhibition
AMSOIL Series 2000 Racing Grease’s excellent
oxidation resistance and robust package of oxidation inhibitors
prevent grease breakdown and component surface damage in the highly
oxidizing conditions associated with high temperature operations.
Friction Reduction
AMSOIL Series 2000 Racing Grease maximizes power
through-put and fuel efficiency by minimizing friction. The extra
power given by Series 2000 improves acceleration and top-end speed.
Washout Resistance and Corrosion Inhibition
AMSOIL Series 2000 Racing Grease resists water
wash out and inhibits rust and other forms of corrosion.
| Typical Technical
Properties |
| AMSOIL
Synthetic Lithium Complex Racing Grease |
NLGI
GC-LB |
Series
2000 Racing Grease |
| Thickener |
NR* |
Lithium
Complex |
| NLGI
Consistency Grade |
NR* |
2
EP |
| NLGI
Performance Grade |
NR* |
GC-LB |
| Penetration
(ASTM D-217) 25° C [77° F], 0.1 mm Worked 60 strokes |
220
- 340 |
265
- 295 |
| Dropping
Point (ASTM D-566) °C [77° F] |
220
[428] |
285
[545] |
| Water
Washout (ASTM D-1264) 79° C [175° F] % loss |
15
max |
5.1 |
| Oil
Separation (ASTM D-1742) 24 hr. @ 25° C [77° F], % loss |
10
max |
2.8 |
| Rust
Protection (ASTM D-1743) |
pass |
pass |
| Timken
OK Load Test (ASTM D-2509), lbs. |
NR* |
60 |
| Fortified
with Moly Compound |
NR* |
no |
| Four
Ball Wear Test (ASTM D-2266) Wear Scar Diameter, mm |
0.9
max |
0.32 |
| Compatibility
with other greases |
NR* |
excellent |
| Extreme
Pressure, Four Ball Method (ASTM D-2596) Weld Point, kgf |
200
min |
400 |
| Extreme
Pressure, Four Ball Method (ASTM D-2596) Load Wear Index,
kgf |
30
min |
65 |
| High
Temperature Life (ASTM D-3527) hours |
80
min |
300 |
| Fretting
Wear (ASTM D-4170)* mg |
10
max |
3.4 |
| Elastomer
Compatibility (ASTM D-4289) Volume Change, %, GC |
-5
to +30 |
21.6 |
| Elastomer
Compatibility (ASTM D-4289) Volume Change, %, LB |
0
to +30 |
9.88 |
| Elastomer
Compatibility (ASTM D-4289) Hardness Change, durometer-A points,
GC |
+2
to -15 |
-3
|
| Elastomer
Compatibility (ASTM D-4289) Hardness Change, durometer-A points,
LB |
0
to -10 |
-6 |
| Leakage
(ASTM D-4290), G* |
10
max |
6.0 |
| Low
Temperature Torque (ASTM D-4693) n·m, max @ -40° C [-40° F] |
15.5 |
2.3 |
| Water
Spray Off (ASTM D-4049), % max |
NR* |
22.7 |
| *
NR: Not Required for NLGI GC or LB labeling |
|
