New AMSOIL Saber Professional Synthetic 2-Cycle
Oil is specifically designed for lean mix ratios in pre-mix applications.
Saber Professional contains high temperature detergents for small
power equipment. Extensive testing shows superior lubricity and
cleanliness properties at lean mix ratios with this premium synthetic
formulation.
PRODUCT DESCRIPTION
AMSOIL Saber Professional Synthetic 100:1 Pre-Mix
2-Cycle Oils are formulated with exclusive AMSOIL synthetic base
oils and premium additives. Designed for lean mix ratios in two-cycle
motors, Saber 2-Cycle Oil has excellent lubricity and cleanliness
properties, controlling friction and preventing wear, plug fouling,
ring sticking and exhaust port blocking. AMSOIL Synthetic 100:1
2-Cycle Oils have been protecting and providing improved performance
in two-cycle motors since 1973.
Product Performance
- Saber Professional is "Smokeless"
- At 100:1, produces 30 percent lower emissions
than oils mixed at 50:1
- Saber Professional is recommended for ISO-L-EGD
applications
- One mix ratio for everything eliminates confusion
- Versatile and very good for many applications
- Cost effective compared to oils mixed at 50:1
or richer
- Saber Outboard exhibits low aquatic toxicity
- Lean mix ratio prevents plug fouling and exhaust
port deposits
Saber Professional
Saber Professional (ATP) is specifically designed
for small engines including, but not limited to, chain saws, lawn
equipment, blowers, chop saws, pumps, scooters and go-carts. It
is also very good for use in motorcycles, snowmobiles, ATVs, jet
boats and personal watercraft. Saber Professional is formulated
with high temperature detergent additives that prevent hard carbon
deposits from forming in these hot operating motors. Saber Professional
is “smokeless” and delivers as much as 30 percent fewer emissions
at 100:1 mix ratios than oils mixed at 50:1. Equipment operators
subjected to smoke and fumes will benefit from these low emission
properties. Because one mix ratio satisfies multiple pieces of
equipment, Saber Professional eliminates mix ratio confusion.
Saber Professional is recommended for pre-mix where ISO-L-EGD,
JASO FC or API TC is specified.
Applications
AMSOIL Saber 100:1 2-Cycle Oil is recommended
for 100:1 mix ratios in normal service and 50:1 to 80:1 mix ratios
in severe service applications such as commercial equipment operations
and racing.
|
TYPICAL TECHNICAL PROPERTIES
|
|
Saber Professional Synthetic 100:1
Pre-Mix 2-Cycle Oils
|
|
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)
|
11.9
|
|
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)
|
78.2
|
| Viscosity Index (ASTM D-2270) |
145
|
|
Pour Point °C (°F) (ASTM D 97)
|
-38 (-36)
|
|
Flash Point °C (°F) (ASTM D 92)
|
101 (214)
|
| Fire Point °C (°F) (ASTM D 92) |
107 (225)
|
| DANGER:
harmful or fatal if swallowed. Contains synthetic lubricant
and petroleum distillates. If swallowed do not induce vomiting.
Contact a physician immediately. Keep away from fire, heat
and open flame. Use with adequate ventilation. Avoid frequent
or prolonged skin contact. Flush eyes with water for 15
minutes in case of contact. KEEP
OUT OF REACH OF CHILDREN. |
|
