New AMSOIL Saber Outboard Synthetic 2-Cycle Oil
is specifically designed for lean mix ratios in pre-mix applications.
Saber Outboard contains lower temperature dispersants for water-cooled
outboard motors. Extensive testing shows superior lubricity and
cleanliness properties at lean mix ratios with this premium synthetic
formulation.
PRODUCT DESCRIPTION
AMSOIL Saber Outboard Synthetic 100:1 Pre-Mix
2-Cycle Oil is formulated with exclusive AMSOIL synthetic base
oils and premium additives. Designed for lean mix ratios in two-cycle
motors, Saber 2-Cycle Oil has excellent lubricity and cleanliness
properties, controlling friction and preventing wear, plug fouling,
ring sticking and exhaust port blocking. AMSOIL Synthetic 100:1
2-Cycle Oils have been protecting and providing improved performance
in two-cycle motors since 1973.
Product Performance
- Saber Outboard is a very low smoke, low odor product
- At 100:1, produces 30 percent lower emissions than oils mixed
at 50:1
- One mix ratio for everything eliminates confusion
- Versatile and very good for many applications
- Cost effective compared to oils mixed at 50:1 or richer
- Saber Outboard exhibits low aquatic toxicity
- Lean mix ratio prevents plug fouling and exhaust port deposits
Saber Outboard
Saber Outboard (ATO) is specifically designed
for outboard motors. It is also very good for personal watercraft,
jet boats, motorcycles, snowmobiles and ATVs. Saber Outboard contains
a heavy dose of lower temperature dispersant additives that excel
at preventing varnish and deposits from forming in water-cooled
motors. Saber Outboard is a very low smoke, low odor, low toxicity
product that produces as much as 30 percent fewer emissions at
100:1 mix ratios than oils mixed at 50:1. It is ideal for trolling
motors as it prevents “oil loading” and plug fouling for rapid
throttle response. Operators and the environment benefit from
the use of Saber Outboard. It is recommended for pre-mix use where
TC-W3 or API TC is specified.
Applications
AMSOIL Saber 100:1 2-Cycle Oil is recommended
for 100:1 mix ratios in normal service and 50:1 to 80:1 mix ratios
in severe service applications such as commercial equipment operations
and racing.
|
TYPICAL TECHNICAL PROPERTIES
|
|
Saber Outboard Synthetic 100:1 Pre-Mix
2-Cycle Oil
|
|
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)
|
13.4
|
|
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)
|
91.3
|
| Viscosity Index (ASTM D-2270) |
148
|
|
Pour Point °C (°F) (ASTM D 97)
|
-36 (-33)
|
|
Flash Point °C (°F) (ASTM D 92)
|
102 (216)
|
| Fire Point °C (°F) (ASTM D 92) |
106 (223)
|
| DANGER:
harmful or fatal if swallowed. Contains synthetic lubricant
and petroleum distillates. If swallowed do not induce vomiting.
Contact a physician immediately. Keep away from fire, heat
and open flame. Use with adequate ventilation. Avoid frequent
or prolonged skin contact. Flush eyes with water for 15
minutes in case of contact. KEEP
OUT OF REACH OF CHILDREN. |
|
