Home Page

Motor Oils
Gear Lubes
Greases
Hydraulic Oils
Compressor Oils
Transmission Fluids
Two Cycle Oils
Oil & Air Filters
By-Pass Oil Filters
Fuel Additives
NGK Products
TRICO Products
Shock Therapy
Specialty Products
Industrial Products
Briteside Products

   
   
 
 

New AMSOIL "Fabulous Four" 2-Cycle Oils provide second-to-none protection and performance in modern two-cycle equipment

Two-cycle engines remain the workhorses in recreational equipment, including outboard motors, motorcycles, snowmobiles and personal watercraft, as well as in lawn and garden applications like lawn mowers and weed eaters. Design changes over recent years have included direct fuel injection engines, in which fuel is injected directly into the combustion chamber, and exhaust power valves, which improve combustion efficiency at varying RPM. These design changes have allowed two-cycle engine manufacturers to effectively reduce emissions, improve fuel efficiency and decrease oil consumption. Today's two-cycle motors of all types require specialized oil technology to deliver maximum engine protection, dependable operation and long service life

As the leader in two-cycle oil technology, AMSOIL has performed extensive research in developing a new line of revolutionary, specialized oils called the "Fabulous Four." AMSOIL INTERCEPTOR Synthetic 2-Cycle Oil (AIT) was the first new oil to be introduced. It is primarily recommended as an injector oil or at a 50:1 mix ratio in carbureted, electronic fuel injected (EFI) and direct fuel injected (DFI) snowmobiles, personal watercraft, motorcycles and ATV's. Formulated with wax-free premium quality synthetic esters and a specialized additive package, INTERCEPTOR is designed to address the exhaust valve sticking problems associated with certain snowmobile models.

New AMSOIL HP Injector Synthetic 2-Cycle Oil (HPI), DOMINATOR Synthetic 2-Cycle Racing Oil (TDR) and Saber Professional (ATP) and Outboard (ATO) Synthetic 100:1 Pre-Mix 2-Cycle Oils complete the Fabulous Four lineup, replacing AMSOIL Synthetic 2-Cycle Injector Oil, Series 2000 Synthetic 2-Cycle Racing Oil and 100:1 Pre-Mix Synthetic 2-Cycle Oil, respectively. The application chart below ranks each oil's performance in common two-cycle applications.

TWO-CYCLE OIL RECOMMENDATION
AMSOIL Product
Outboard*
Snowmobile*,
Motorcycle* & ATV*
Personal Watercraft*
& Jet Boat*
Chainsaw,
Chop Saw & Pump
Weed Eater,
Blower & Lawn Mower
Moped, Scooter
& Go-Cart
HP Injector (HPI)
TC-W3, API TC
(Injection or 50:1 Pre-Mix)
Excellent
Very Good
Very Good
Not recommended
Not recommended
Not recommended
INTERCEPTOR (AIT)
API TC, JASO FC
Not recommended
Excellent
Excellent
Good
Good
Good
DOMINATOR (TDR)
API TC, JASO FC
Racing (1)
Racing (2)
Racing (2)
Very Good
Very Good
Very Good
Saber Professional 100:1 (ATP)
Pre-Mix ISO-L-EGD
JASO FC, API TC
Not recommended
Very Good
Pre-Mix Only
Very Good
Pre-Mix Only
Excellent
Excellent
Excellent
Saber Outboard 100:1 (ATO)
Pre-Mix, TC-W3, API TC
Excellent
Pre-Mix Only
Very Good
Pre-Mix Only
Very Good
Pre-Mix Only
Not recommended
Not recommended
Not recommended

Even though AMSOIL 2-Cycle Oils have been optimized for specific applications, they are multi-functional and recommended for use in many areas. The chart rates each oil's performance abilities per application as follows:

Excellent: "The" primary recommendation for the oil. This is the best possible choice for the application. The oil is specifically designed for the operating conditions of the motors in these markets. There is only one "Excellent" recommendation per category.

Very Good: A main recommendation for the oil. Identifies an oil that is very good for the operating conditions of these motors.

Good: A secondary recommendation for an oil. The oil was not specifically designed for these applications, however, the chemistry in the oil is suited to the operating conditions of these motors.

Not Recommended: Identifies applications where the product was not intended for use. "Excellent" rated products otter superior performance.

Racing:

(1) Not recommended for long-term use in outboard motors as a TC-W3 type oil, although excellent as a race oil for short term use where motors are periodically inspected.

(2) Excellent for racing or modified motors. Very good for recreational use.

*Recommended for all (OFI) direct fuel injected, (EFI) electronic fuel injected, and carbureted motors. Outboard motors include Mercury®, Optimax®, Johnson® & Evinrude® FICHT® & E-TEC®, Yamaha® HPDI, Nissan® & Tohatsu® TLDI®

 
 

Dominator 2-Cycle Racing Oil

AMSOIL Dominator 2-Cycle Racing Oil retained 17.6 percent more power in lubricity tests run against petroleum and synthetic TC-W3 reference oils. The outstanding lubrication and protection offered by Dominator 2-Cycle Racing Oil to two-cycle engines subject to the flat-out performance demands of racing minimizes power-robbing friction and prevents piston scuffing and seizure.

Dominator 2-Cycle Racing Oil also burns much cleaner than conventional two-cycle oils, ensuring engine cleanliness and maximum performance.

Dominator 2-Cycle Racing Oil outperforms manufacturer-recomended two-cycle oils and may be used as a replacement for them.

 
AMSOIL INTERCEPTOR Synthetic 2-Cycle Oil is formulated with a proprietary blend of the finest synthetic base oils and additives available today. This unique AMSOIL chemistry represents a breakthrough development in the field of two-cycle engine lubrication.
Product Codes: AIT (more product info)
New AMSOIL HP Injector Synthetic 2-Cycle Oil is a precise synthetic formulation that exceeds the lubrication demands of modern two-cycle engines. It contains premium synthetic base oils and MAX-DOSE additive system, providing superior performance in direct fuel injected (DFI), electronic fuel injected (EFI) and carbureted outboard motors, as well as other recreational two-cycle equipment.
Product Code: HPI (more product info)
New AMSOIL Saber Professional Synthetic 2-Cycle Oil is specifically designed for lean mix ratios in pre-mix applications. Saber Professional contains high temperature detergents for small power equipment. Extensive testing shows superior lubricity and cleanliness properties at lean mix ratios with this premium synthetic formulation.
Product Code: ATP (more product info)
 
Clings to metal surfaces better than other oils. Delivers unparalleled lubrication and protection.
Product Code: ABC (more product info)